PLANET SGSD-1022 - Manual (Page 115)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
The page includes the following fields:
Object Description
• Name Interface label.
• Type Indicates the port type. The possible type such as:
- 100BASE-TX
- 1000BASE-T
- 1000BASE-SFP
• Admin Status Shows if the interface is enabled or disabled.
• Oper Status Indicates if the link is Up or Down.
• Speed Duplex Status Shows the current speed and duplex mode. (Auto, or fixed choice)
• Flow Control Status Indicates the type of flow control currently in use.
- IEEE 802.3x
- Back-Pressure
- None
• Autonegotiation Shows if auto-negotiation is enabled or disabled.
• Trunk Member Shows if port is a trunk member.
• Creation Shows if a trunk is manually configured or dynamically set via LACP.
(Trunk Information only.)
In some situation, when the Managed Switch port is set to “Auto-negotiation” mode and
the link partner (ex. PC or another switch) is force set to “100Full”, the speed duplex status
shows “100Half” since the Managed Switch is fail to negotiation with the link partner.
115