PLANET SGSD-1022 - Manual (Page 308)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Figure 4-11-31 Settings screenshot
The page includes the following fields:
Object Description
Mode Enables MAC authentication on a port.
(Default: None)
Maximum MAC Count Sets the maximum number of MAC addresses that can be authenticated on a
port. The maximum number of MAC addresses per port is 2048, and the
maximum number of secure MAC addresses supported for the switch system is
1024. When the limit is reached, all new MAC addresses are treated as an
authentication failure.
(Range: 1-1024; Default: 1024)
Guest VLAN Specifies the VLAN to be assigned to the port when MAC Authentication through
802.1X fails.
(Default: Disabled; Range: 1-4094)
The VLAN must already be created and active (see “Creating VLANs”). Also,
when used with 802.1X authentication, intrusion action must be set for “Guest
VLAN” (see “ Configuring Port Settings for 802.1X ”)
Dynamic VLAN Enables dynamic VLAN assignment for an authenticated port. When enabled,
any VLAN identifiers returned by the RADIUS server are applied to the port,
providing the VLANs have already been created on the switch. (GVRP is not
used to create the VLANs.)
(Default: Enabled)
308