PLANET SGSD-1022 - Manual (Page 181)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
4.8.1.4 VLAN Static List
Creating VLANs
Use the VLAN Static List to create or remove VLAN groups. To propagate information about VLAN groups used on this
Managed Switch to external network devices, you must specify a VLAN ID for each of these groups.
Figure 4-8-4 VLAN Static List page screenshot
The page includes the following fields:
Object Description
• Current Lists all the current VLAN groups created for this system.
Up to 255 VLAN groups can be defined.
VLAN 1 is the default untagged VLAN.
VLAN 4093 is reserved for switch clustering and is not user-configurable or
removable.
• New Allows you to specify the name and numeric identifier for a new VLAN group.
(The VLAN name is only used for management on this system; it is not added to
the VLAN tag.)
• VLAN ID ID of configured VLAN (1-4094, no leading zeroes).
• VLAN Name Name of the VLAN (1 to 32 characters, no spaces).
• Status Enables or disables the specified VLAN.
- Enabled: VLAN is operational.
- Disabled: VLAN is suspended; i.e., does not pass packets.
• Add Adds a new VLAN group to the current list.
• Remove Removes a VLAN group from the current list.
If any port is assigned to this group as untagged, it will be reassigned to VLAN
group 1 as untagged.
181