PLANET SGSD-1022 - Manual (Page 98)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
v3 AuthPriv user defined user defined user defined user defined Provides user
authentication via MD5
or SHA algorithms and
data privacy using DES
56-bit encryption
The predefined default groups and view can be deleted from the system. You can then
define customized groups and views for the SNMP clients that require access.
4.3.1 SNMP Agent Status
Enable SNMP service for all management clients. (i.e., versions 1, 2c or 3).
Figure 4-3-1 SNMP Agent Status page screenshot
The page includes the following fields:
Object Description
• Snmp Agent Status Enable / Disable SNMP on the Managed Switch
4.3.2 SNMP Configuration
Use this page to configure the community strings authorized for management access, and to specify the trap managers that will
receive SNMP notifications or trap messages.
4.3.2.1 SNMP Community
All community strings used for IP Trap Managers should be listed in this table. Up to five community strings may be entered. For
security reasons, you should consider removing the default strings.
98