PLANET SGSD-1022 - Manual (Page 472)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
-Port-control - Shows the dot1x mode on a port as auto, force-authorized, or
force-unauthorized.
-Supplicant - MAC address of authorized client. -Current Identifier – The
integer (0-255) used by the Authenticator to identify the current
authentication session.
-Intrusion action - Shows whether the switch will block all traffic or assign traffic
on the port to a guest VLAN if authentication fails.
• Authenticator State Machine
- State - Current state (including initialize, disconnected, connecting,
authenticating, authenticated, aborting, held, force_authorized,
force_unauthorized).
-Reauth Count - Number of times connecting state is re-entered.
• Backend State Machine
-State - Current state (including request, response, success, fail,
timeout, idle, initialize).
-Request Count - Number of EAP Request packets sent to the Supplicant without
receiving a response.
- Identifier(Server) - Identifier carried in the most recent EAP Success, Failure or
Request packet received from the Authentication Server.
• Reauthentication State Machine
-State - Current state (including initialize, reauthenticate).
Example
Console# show dot1x
Global 802.1X Parameters
system-auth-control: enable
802.1X Port Summary
Port Name
1/1
1/2
1/28
Status
disabled
enabled
disabled Operation Mode
Single-Host
Single-Host
Single-Host Mode
ForceAuthorized
auto
ForceAuthorized Authorized
n/a
yes
n/a
802.1X Port Details
802.1X is disabled on port 1/1
802.1X is enabled on port 1/2
472