PLANET SGSD-1022 - Manual (Page 358)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
System will be restarted, continue <y/n>? y
prompt
This command customizes the CLI prompt. Use the no form to restore the default prompt.
Syntax
prompt string no prompt string - Any alphanumeric string to use for the CLI prompt. (Maximum length: 255 characters)
Default Setting
Console Command Mode Global Configuration
Example
Console(config)#prompt RD2
RD2(config)#
end
This command returns to Privileged Exec mode.
Default Setting
None
Command Mode
Global Configuration, Interface Configuration, Line Configuration, and VLAN Database Configuration.
Example
This example shows how to return to the Privileged Exec mode from the Interface Configuration mode:
Console(config-if)# end
Console#
exit
This command returns to the previous configuration mode or exit the configuration program.
Default Setting
None
Command Mode
Any
Example
This example shows how to return to the Privileged Exec mode from the Global Configuration mode, and then quit the CLI
358