PLANET SGSD-1022 - Manual (Page 554)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Example
Console(config-mstp)#mst 1 vlan 2-5
Console(config-mstp)#
mst priority
This command configures the priority of a spanning tree instance. Use the no form to restore the default.
Syntax
mst instance_id priority priority no mst instance_id priority
instance_id - Instance identifier of the spanning tree. (Range: 0-4094)
priority - Priority of the a spanning tree instance. (Range: 0-61440 in steps of 4096; Options: 0, 4096, 8192, 12288, 16384,
20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344, 61440)
Default Setting
32768
Command Mode
MST Configuration
Command Usage
MST priority is used in selecting the root bridge and alternate bridge of the specified instance. The device with the highest
priority (i.e., lowest numerical value) becomes the MSTI root device. However, if all devices have the same priority, the
device with the lowest MAC address will then become the root device.
You can set this switch to act as the MSTI root device by specifying a priority of 0, or as the MSTI alternate device by
specifying a priority of 16384.
Example
Console(config-mstp)#mst 1 priority 4096
Console(config-mstp)#
name
This command configures the name for the multiple spanning tree region in which this switch is located. Use the no form to clear
the name.
Syntax
name name name - Name of the spanning tree.
554