PLANET SGSD-1022 User Manual
Page 194
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
The page includes the following fields:
Object
Description
• Port
Port number.
Set the VLAN membership mode of the port.
• None
The port operates in its normal VLAN mode.
(This is the default.)
• 802.1Q Tunnel
Configures IEEE 802.1Q tunneling (QinQ) for a client
access port to segregate and preserve customer VLAN IDs
for traffic crossing the service provider network.
• 802.1Q Tunnel
Uplink
Configures IEEE 802.1Q tunneling (QinQ) for an uplink port
to another device within the service provider network.
• Mode
Default: None
• 802.1Q Ethernet Type
The Tag Protocol Identifier (TPID) specifies the ethertype of incoming packets
on a tunnel access port.
Range: 0800-FFFF hexadecimal
(Default: 8100)
• Trunk Member
Shows if a port is a member or a trunk.
If you have host devices that do not support GVRP, you should configure static or untagged
VLANs for the switch ports connected to these devices But you can still enable GVRP on
these edge switches, as well as on the core switches in the network.
194