PLANET SGSD-1022 - Manual (Page 248)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
4.10.3.1 Configuring a DiffServ Class Map
A class map is used for matching packets to a specified class.
Command Usage
• To configure a Class Map, follow these steps:
- Open the Class Map page, and click Add Class.
- -When the Class Configuration page opens, fill in the “Class Name” field, and click Add.
- When the Match Class Settings page opens, specify type of traffic for this class based on an access list, and click
the Add button next to the field for the selected traffic criteria. You can specify up to 16 items to match when assigning
ingress traffic to a class map.
• The class map is used with a policy map to create a service policy for a specific interface that defines packet classification,
service tagging, and bandwidth policing. Note that one or more class maps can be assigned to a policy map.
Figure 4-10-15 Class Map page screenshot
The page includes the following fields:
Object Description
Modify Name and
Description
Configures the name and a brief description of a class map.
(Range: 1-16 characters for the name; 1-64 characters for the description)
Edit Rules Opens the “Match Class Settings” page for the selected class entry. Modify the
criteria used to classify ingress traffic on this page.
Add Class Opens the “Class Configuration” page. Enter a class name and description on
this page, and click Add to open the “Match Class Settings” page. Enter the
criteria used to classify ingress traffic on this page.
Remove Class Removes the selected class.
248