4 port mirroring, 1 mirror port configuration – PLANET SGSD-1022 User Manual
Page 120
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
4.4.4 Port Mirroring
The Managed Switch can unobtrusively mirror traffic from any port to a monitor port. You can then attach a protocol analyzer or
RMON probe to this port to perform traffic analysis and verify connection integrity.
Figure 4-4-4 Port Mirror application
4.4.4.1 Mirror Port Configuration
You can mirror traffic from any source port to a target port for real-time analysis. You can then attach a logic analyzer or RMON
probe to the target port and study the traffic crossing the source port in a completely unobtrusive manner.
Command Usage
• Monitor port speed should match or exceed source port speed, otherwise traffic may be dropped from the monitor port.
• All mirror sessions must share the same destination port.
1. Click
Port,
Mirror Port Configuration.
2. Specify
the
source port, the traffic type to be mirrored
3. Specify
the
monitor target port, then click Add.
120