PLANET SGSD-1022 - Manual (Page 616)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises extended Power-over-Ethernet capability details, such as power availability from the switch, and
power state of the switch, including whether the switch is operating from primary or backup power (the Endpoint Device
could use this information to decide to enter power conservation mode). Note that this device does not support PoE
capabilities.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp medtlv extpoe
Console(config-if)#
lldp medtlv inventory
This command configures an LLDP-MED-enabled port to advertise its inventory identification details. Use the no form to disable
this feature.
Syntax
[no] lldp medtlv inventory
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises device details useful for inventory management, such as manufacturer, model, software version
and other pertinent information.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp medtlv inventory
Console(config-if)#
616