PLANET SGSD-1022 - Manual (Page 94)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
(See Table 4-2-1, “Chassis ID Subtype,)
• Chassis ID An octet string indicating the specific identifier for the particular chassis in this
system.
• Port Type Indicates the basis for the identifier that is listed in the Port ID field.
• System Name An string that indicates the system’s administratively assigned name.
• System Description A textual description of the network entity.
• System Capabilities
Supported
The capabilities that define the primary function(s) of the system.
(See Table 4-2-2, “System Capabilities,)
• System Capabilities
Enabled
The primary function(s) of the system which are currently enabled. Refer to the
preceding table.
(See Table 4-2-2, “System Capabilities,)
• Management Address The IPv4 address of the remote device. If no management address is available,
the address should be the MAC address for the CPU or for the port sending this
advertisement.
ID Basis Reference
Interface alias IfAlias (IETF RFC 2863)
Chassis component EntPhysicalAlias when entPhysClass has a value of
‘chassis(3)’ (IETF RFC 2737)
Port component EntPhysicalAlias when entPhysicalClass has a value
‘port(10)’ or ‘backplane(4)’ (IETF RFC 2737)
MAC address MAC address (IEEE Std 802-2001)
Network address networkAddress
Interface name ifName (IETF RFC 2863)
Agent circuit ID agent circuit ID (IETF RFC 3046)
Locally assigned locally assigned
Table 4-2-3 Port ID Subtype
94