2 snmp ip filter – PLANET SGSD-1022 User Manual
Page 322
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
1.
Click Security, IP Filter.
2.
Enter the IP addresses or range of addresses that are allowed management access to an interface, and click Add Web IP
Filtering Entry to update the filter list.
The page includes the following fields:
Object
Description
Web IP Filter
Configures IP address(es) for the web group.
Start IP Address
A single IP address, or the starting address of a range.
End IP Address
The end address of a range.
Add/Remove Filtering
Entry
Adds/removes an IP address from the list.
4.11.14.2 SNMP IP Filter
You can create IP address groups that are allowed management access to the Managed Switch through the SNMP application.
Figure 4-11-43 SNMP IP Filter page screenshot
1.
Click Security, IP Filter.
2.
Enter the IP addresses or range of addresses that are allowed management access to an interface, and click Add SNMP
IP Filtering Entry to update the filter list.
The page includes the following fields:
322