PLANET SGSD-1022 - Manual (Page 352)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Policy Map policy map Console(config-pmap)
Server Group aaa group server radius
aaa group server tacacs+
Console(config-sg-radius)
Console(config-sg-tacacs+)
VLAN vlan database Console(config-vlan)
Table 5-2 Configuration Modes
For example, you can use the following commands to enter interface configuration mode, and then return to Privileged Exec
mode
Console(config)# interface ethernet 1/5
Console(config-if)# exit
Console(config)#
5.2.12 Command Line Processing
Commands are not case sensitive. You can abbreviate commands and parameters as long as they contain enough letters to
differentiate them from any other currently available commands or parameters. You can use the Tab key to complete partial
commands, or enter a partial command followed by the “?” character to display a list of possible matches. You can also use the
following editing keystrokes for command-line processing:
Keystroke Function
Ctrl-A Shifts cursor to start of command line.
Ctrl-B Shifts cursor to the left one character.
Ctrl-C Terminates the current task and displays the command prompt.
Ctrl-E Shifts cursor to end of command line.
Ctrl-F Shifts cursor to the right one character.
Ctrl-K Deletes all characters from the cursor to the end of the line.
Ctrl-L Repeats current command line on a new line.
Ctrl-N Enters the next command line in the history buffer.
Ctrl-P Enters the last command.
Ctrl-R Repeats current command line on a new line.
Ctrl-U Deletes from the cursor to the beginning of the line.
Ctrl-W Deletes the last word typed.
Esc-B Moves the cursor back one word.
Esc-D Deletes from the cursor to the end of the word.
Esc-F Moves the cursor forward one word.
Delete key or
backspace key
Erases a mistake when entering a command.
Table 5-3 Command Line Processing
352