PLANET SGSD-1022 - Manual (Page 573)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
name - Keyword to be followed by the VLAN name.
-vlan-name -ASCII string from 1 to 32 characters.
media ethernet - Ethernet media type.
state - Keyword to be followed by the VLAN state. -active -VLAN is operational. -suspend - VLAN is suspended.
Suspended VLANs do not pass packets.
Default Setting
By default only VLAN 1 exists and is active.
Command Mode
VLAN Database Configuration
Command Usage
no vlan vlan-id deletes the VLAN.
no vlan vlan-id name removes the VLAN name.
no vlan vlan-id state returns the VLAN to the default state (i.e., active).
You can configure up to 255 VLANs on the switch.
The switch allows 255 user-manageable VLANs. One other VLAN (VLAN ID 4093) is
reserved for switch clustering.
Example
The following Example adds a VLAN, using VLAN ID 105 and name RD5. The VLAN is activated by default.
Console(config)#vlan database
Console(config-vlan)#vlan 105 name RD5 media ethernet
Console(config-vlan)#
Related Commands
show vlan
5.21.3 Configuring VLAN Interfaces
Command Function Mode
interface vlan Enters interface configuration mode for a specified VLAN GC
switchport mode Configures VLAN membership mode for an interface IC
switchport
acceptable-frame-types
Configures frame types to be accepted by an interface IC
573