PLANET SGSD-1022 - Manual (Page 487)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
3600 seconds
Command Mode
Global Configuration
Example
Console(config)#web-auth session-timeout 1800
Console(config)#
web-auth system-auth-control
This command globally enables web authentication for the switch. Use the no form to restore the default.
Syntax
[no] web-auth system-auth-control
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
Both web-auth system-auth-control for the switch and web-auth for an interface must be enabled for web authentication to
be active.
Example
Console(config)#web-auth system-auth-control
Console(config)#
web-auth
This command enables web authentication for a port. Use the no form to restore the default.
Syntax
[no] web-auth
Default Setting
Disabled
Command Mode
Interface Configuration
Command Usage
Both web-auth system-auth-control for the switch and web-auth for a port must be enabled for web authentication to be
active.
487