PLANET SGSD-1022 - Manual (Page 360)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
5.5 System Management Commands
These commands are used to control system logs, passwords, user names, browser configuration options, and display or
configure a variety of other system information.
Command Group Function
Device Designation Configures information that uniquely identifies this switch
Banner Information Configures administrative contact, device identification and location
System Status Displays system configuration, active managers, and version information
Frame Size Enables support for jumbo frames
File Management Manages code image or switch configuration files
Line Sets communication parameters for the serial port, including baud rate and console time-out
Event Logging Controls logging of error messages
SMTP Alerts Configures SMTP email alerts
Time (System Clock) Sets the system clock automatically via SNTP server or manually
Switch Clustering Configures management of multiple devices via a single IP address
Table 5-6 System Management Commands
5.5.1 Device Designation Commands
Command Function Mode
hostname Specifies the host name for the switch GC
snmp-server contact Sets the system contact string GC
snmp-server location Sets the system location string GC
Table 5-7 Device Designation Commands
hostname
This command specifies or modifies the host name for this device. Use the no form to restore the default host name.
Syntax
hostname name no hostname name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#hostname RD#1
360