PLANET SGSD-1022 - Manual (Page 668)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
The following shows information about the interfaces associated with multicast groups assigned to the MVR VLAN:
Console# show mvr members
MVR Group IP Status Members
------------------- ---------- ----------------
225.0.0.1 ACTIVE eth1/1(d), eth1/2(s)
225.0.0.2 INACTIVE None
225.0.0.3 INACTIVE None
225.0.0.4 INACTIVE None
225.0.0.5 INACTIVE None
225.0.0.6 INACTIVE None
225.0.0.7 INACTIVE None
225.0.0.8 INACTIVE None
225.0.0.9 INACTIVE None
225.0.0.10 INACTIVE None
Console#
Field Description
MVR Group IP Multicast groups assigned to the MVR VLAN.
Status Shows whether or not the there are active subscribers for this
multicast group. Note that this field will also display
“INACTIVE” if MVR is globally disabled.
Members Shows the interfaces with subscribers for multicast services
provided through the MVR VLAN. Also shows if an interface
has dynamically joined a multicast group (d), or if a multicast
group has been statically bound to the interface (s).
Table 5-92 show mvr members - display description
668