PLANET SGSD-1022 - Manual (Page 141)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
The page includes the following fields:
„ Set Port Actor - This menu sets the local side of an aggregate link; i.e., the ports on this switch.
Object Description
• Port Port number.
(SGSD-1022 / SGSD-1022P Range: 1-10)
(SGSW-2840 / SGSW-2840P Range: 1-28)
• System Priority LACP system priority is used to determine link aggregation group (LAG)
membership, and to identify this device to other switches during LAG
negotiations.
Range: 0-65535
Default: 32768
- Ports must be configured with the same system priority to join the same
LAG.
- System priority is combined with the switch’s MAC address to form the LAG
identifier. This identifier is used to indicate a specific LAG during LACP
negotiations with other systems.
• Admin Key The LACP administration key must be set to the same value for ports that belong
to the same LAG.
Range: 0-65535;
Default: 1
• Port Priority If a link goes down, LACP port priority is used to select a backup link.
Range: 0-65535;
Default: 32768
„ Set Port Partner – This menu sets the remote side of an aggregate link; i.e., the ports on the attached
device.
If the port channel admin key (lacp admin key.) is not set (through the CLI) when a channel
group is formed (i.e., it has a null value of 0), this key is set to the same value as the port
admin key used by the interfaces that joined the group (lacp admin key, as described in this
section).
141