3 telnet ip filter – PLANET SGSD-1022 User Manual
Page 323
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Object
Description
SNMP IP Filter
Configures IP address(es) for the SNMP group.
Start IP Address
A single IP address, or the starting address of a range.
End IP Address
The end address of a range.
Add/Remove Filtering
Entry
Adds/removes an IP address from the list.
4.11.14.3 Telnet IP Filter
You can create IP address groups that are allowed management access to the Managed Switch through telnet.
Figure 4-11-44 Telnet IP Filter page screenshot
1.
Click Security, IP Filter.
2.
Enter the IP addresses or range of addresses that are allowed management access to an interface, and click Add Telnet
IP Filtering Entry to update the filter list.
The page includes the following fields:
Object
Description
Telnet IP Filter
Configures IP address(es) for the Telnet group.
Start IP Address
A single IP address, or the starting address of a range.
323