PLANET SGSD-1022 - Manual (Page 367)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Default Setting
None
Command Mode
Global Configuration
Command Usage
Input strings cannot contain spaces. The banner configure lp-number command interprets spaces as data input
boundaries. The use of underscores ( _ ) or other unobtrusive non-letter characters is suggested for situations where
whitespace is necessary for clarity.
Example
Console(config)# banner configure lp-number 12
Console(config)#
banner configure manager-info
This command is used to configure the manager contact information displayed in the banner. Use the no form to restore the
default setting.
Syntax
banner configure manager-info name mgr1-name phone-number mgr1-number [name2 mgr2-name phone-number
mgr2-number | name3 mgr3-name phone-number mgr3-number] no banner configure manager-info [name1 | name2 |
name3]
mgr1-name -The name of the first manager.
mgr1-number -The phone number of the first manager.
mgr2-name -The name of the second manager.
mgr2-number -The phone number of the second manager.
mgr3-name -The name of the third manager.
mgr3-number -The phone number of the third manager.
Default Setting
None
Command Mode
Global Configuration
Command Usage
Maximum string length for each command attribute is 32 characters. Input strings cannot contain spaces.
The banner configure manager-info command interprets spaces as data input boundaries. The use of underscores ( _ ) or
other unobtrusive non-letter characters is suggested for situations where whitespace is necessary for clarity.
Example
367