PLANET SGSD-1022 - Manual (Page 667)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
MVR running status:TRUE
MVR multicast vlan:1
MVR Max Multicast Groups:255
MVR Current multicast groups:10
Console#
Field Description
MVR Status Shows if MVR is globally enabled on the switch.
MVR running status Indicates whether or not all necessary conditions in the MVR
environment are satisfied.
MVR multicast vlan Shows the VLAN used to transport all MVR multicast traffic.
MVR Max Multicast Groups Shows the maximum number of multicast groups which can
assigned to the MVR VLAN.
MVR Current multicast groups Shows the number of multicast groups currently assigned to the
MVR VLAN.
Table 5-90 show mvr - display description
The following displays information about the interfaces attached to the MVR VLAN:
Console# show mvr interface
Port Type Status Immediate Leave
--------- ---------- -------------------- -----------------------
eth1/1 SOURCE ACTIVE/UP Disable
eth1/2 RECEIVER ACTIVE/UP Disable
eth1/5 RECEIVER INACTIVE/DOWN Disable
eth1/6 RECEIVER INACTIVE/DOWN Disable
eth1/7 RECEIVER INACTIVE/DOWN Disable
Console#
Field Description
Port Shows interfaces attached to the MVR.
Type Shows the MVR port type.
Status Shows the MVR status and interface status. MVR status for
source ports is“ACTIVE” if MVR is globally enabled on the
switch. MVR status for receiverports is “ACTIVE” only if there
are subscribers receiving multicast traffic from one of the MVR
groups, or a multicast group has been statically assigned to an
interface.
Immediate Leave Shows if immediate leave is enabled or disabled.
Table 5-91 show mvr interface - display description
667