PLANET SGSD-1022 - Manual (Page 446)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
None
Command Mode
Interface Configuration
Example
Console(config)# interface ethernet 1/2
Console(config-if)# accounting dot1x tps
Console(config-if)#
accounting exec
This command applies an accounting method to local console or Telnet connections. Use the no form to disable accounting on
the line.
Syntax
accounting exec {default | list-name} no accounting exec default -Specifies the default method list created with the aaa
accounting exec command (page 4-99).
list-name - Specifies a method list created with the aaa accounting exec command.
Default Setting
None
Command Mode
Line Configuration
Example
Console(config)#line console
Console(config-line)#accounting exec tps
Console(config-line)#exit
Console(config)#line vty
Console(config-line)#accounting exec default
Console(config-line)#
accounting commands
This command applies an accounting method to entered CLI commands. Use the no form to disable accounting for entered
commands.
446