PLANET SGSD-1022 - Manual (Page 381)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Private password: ********
Success.
Console#reload
System will be restarted, continue <y/n>? y
This example shows how to copy a public-key used by SSH from a TFTP server. Note that public
key authentication via SSH is only supported for users configured locally on the switch:
Console#copy tftp public-key
TFTP server IP address: 192.168.1.19
Choose public key type:
1. RSA: 2. DSA: <1-2>: 1
Source file name: steve.pub
Username: steve
TFTP Download
Success.
Write to FLASH Programming.
Success.
Console#
delete
This command deletes a file or image.
Syntax
delete filename filename -Name of the configuration file or image name.
Command Mode
Privileged Exec
Command Usage
If the file type is used for system startup, then this file cannot be deleted.
“Factory_Default_Config.cfg” cannot be deleted.
Example
This example shows how to delete the test2.cfg configuration file from flash memory for unit 1.
Console#delete 1:test2.cfg
381