PLANET SGSD-1022 - Manual (Page 534)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
lacp admin-key (Port Channel)
This command configures a port channel's LACP administration key string. Use the
no form to restore the Default Setting .
Syntax
lacp {actor | partner} admin-key key
[no] lacp {actor | partner} admin-key
key -The port channel admin key is used to identify a specific link aggregation group (LAG) during local LACP setup on
this switch. (Range: 0-65535)
Default Setting
0
Command Mode
Interface Configuration (Port Channel)
Command Usage
Ports are only allowed to join the same LAG if (1) the LACP system priority matches, (2) the LACP port admin key
matches, and (3) the LACP port channel key matches (if configured).
If the port channel admin key (lacp admin key - Port Channel) is not set when a channel group is formed (i.e., it has the
null value of 0), this key is set to the same value as the port admin key (lacp admin key - Ethernet Interface) used by the
interfaces that joined the group. Note that when the LAG is no longer used, the port channel admin key is reset to 0.
Example
Console(config)#interface port-channel 1
Console(config-if)#lacp actor admin-key 3
Console(config-if)#
lacp port-priority
This command configures LACP port priority. Use the no form to restore the Default Setting .
Syntax
lacp {actor | partner} port-priority priority
no lacp {actor | partner} port-priority
actor - The local side an aggregate link.
partner - The remote side of an aggregate link.
priority - LACP port priority is used to select a backup link.
(Range: 0-65535)
Default Setting
32768
534