PLANET SGSD-1022 - Manual (Page 373)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
-SNMP community strings
-Users (names, access levels, and encrypted passwords)
-Event log settings
-VLAN database (VLAN ID, name and state)
-VLAN configuration settings for each interface
-Spanning tree settings
-Interface settings
-IP address configured for the switch
-Any configured settings for the console port and Telnet
System Management Commands
Example
Console# show running-config
building startup-config, please wait.....
!<stackingDB>00</stackingDB>
!<stackingMac>01_00-30-4f-10-22-bc_01</stackingMac>
!
phymap 00-30-4f-10-22
!
SNTP server 0.0.0.0 0.0.0.0 0.0.0.0
!
broadcast byte-rate 1000 level 5
!
no dot1q-tunnel system-tunnel-control
!
SNMP-server community public ro
SNMP-server community private rw
!
username admin access-level 15
username admin password 7 21232f297a57a5a743894a0e4a801fc3
username guest access-level 0
username guest password 7 084e0343a0486ff05530df6c705c8bb4
enable password level 15 7 1b3231655cebb7a1f783eddf27d254ca
!
no logging trap
!
vlan database
373