PLANET SGSD-1022 - Manual (Page 593)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Example
The following example maps the traffic entering Port 1 which matches the protocol type specified in protocol group 1 to
VLAN 2.
Console(config)#interface ethernet 1/1
Console(config-if)#protocol-vlan protocol-group 1 vlan 2
Console(config-if)#
show protocol-vlan protocol-group
This command shows the frame and protocol type associated with protocol groups.
Syntax
show protocol-vlan protocol-group [group-id]
group-id - Group identifier for a protocol group. (Range: 1-2147483647)
Default Setting
All protocol groups are displayed.
Command Mode
Privileged Exec
Example
This example shows many protocol groups configured for various protocol-types and frame-types:
Console# show protocol-vlan protocol-group
ProtocolGroup ID Frame Type Protocol Type
--------------------------- ------------------- -----------
4 Ethernet 0B AD
8 Ethernet 80 2E
5000
Ethernet 81 37
12 Ethernet 81 46
5000
Ethernet 86 DD
6 RFC 1042 43 21
10 RFC 1042 80 49
7 SNAP 802.1h 80 3C
11 SNAP 802.1h 80 A3
50 SNAP 802.1h 81 2B
5000
SNAP 802.1h 86 DD
1 08 00
3 80 9B
2 81 37
Console#
593