PLANET SGSD-1022 - Manual (Page 398)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
None
Command Mode
Privileged Exec
Example
The following example shows that system logging is enabled, the message level for flash memory is “errors” (i.e., default
level 3 - 0), the message level for RAM is “informational” (i.e., default level 7 -0).
Console#show logging flash
Syslog logging: Enabled
History logging in FLASH: level errors
Console#show logging ram
Syslog logging: Enabled
History logging in RAM: level debugging
Console#
Table 4-16 show logging flash/ram - display description
Field Description
Syslog logging Shows if system logging has been enabled via the
logging on command.
History logging
in FLASH
The message level(s) reported based on the logging
history command.
History logging
in RAM
The message level(s) reported based on the logging
history command.
The following example displays settings for the trap function.
Console#show logging trap
Syslog logging: Enable
REMOTELOG status: disable
REMOTELOG facility type: local use 7
REMOTELOG level type: Debugging messages
REMOTELOG server IP address: 1.2.3.4
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
Console#
398