PLANET SGSD-1022 - Manual (Page 340)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
4.13 Power Over Ethernet (SGSD-1022P / SGSW-2840P / SGSW-2840P4)
Providing up to 8/24 PoE, in-line power interface, the SGSD-1022P / SGSW-2840P PoE Switch can easily build a power
central-controlled IP phone system, IP Camera system, AP group for the enterprise. For instance, 8 camera / AP can be easily
installed around the corner in the company for surveillance demands or build a wireless roaming environment in the office.
Without the power-socket limitation, the PoE Switch makes the installation of cameras or WLAN AP more easily and efficiently.
4.13.1 Power over Ethernet Powered Device
3~5 watts
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other Ethernet/non-Ethernet
end-devices to the central where UPS is installed for un-interrupt power system
and power control system.
6~12 watts
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory, Warehouse can
install the Access Point any where with no hesitation
10~12 watts
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera without
limits of install location – no need electrician to install AC sockets.
3~12 watts
PoE Splitter
PoE Splitter split the PoE 48V DC over the Ethernet cable into 5/9/12V DC
power output. It frees the device deployment from restrictions due to power
outlet locations, which eliminate the costs for additional AC wiring and reduces
the installation time.
340