PLANET SGSD-1022 - Manual (Page 528)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
802.1Q-tunnel Mode: NORMAL
802.1Q-tunnel TPID: 8100(Hex)
Console#
Field Description
Broadcast Threshold Shows if broadcast storm suppression is enabled or disabled; if
enabled it also shows the threshold level
LACP Status Shows if Link Aggregation Control Protocol has been enabled or
disabled
Ingress Rate Limit Shows if ingress rate limiting is enabled, and the current rate limit.
Egress Rate Limit Shows if egress rate limiting is enabled, and the current rate limit.
VLAN Membership Mode Indicates membership mode as Trunk or Hybrid
Ingress Rule Shows if ingress filtering is enabled or disabled. Note: Ingress
filtering is always enabled.
Acceptable Frame Type Shows if acceptable VLAN frames include all types or tagged
frames only
Native VLAN Indicates the default Port VLAN ID.
Priority for UntaggedTraffic Indicates the default priority for untagged frames
GVRP Status Shows if GARP VLAN Registration Protocol is enabled or disabled
Allowed VLAN Shows the VLANs this interface has joined, where “(u)” indicates
untagged and “(t)” indicates tagged
Forbidden VLAN Shows the VLANs this interface can not dynamically join via GVRP
Private VLAN Mode Shows the private VLAN mode as host, promiscuous, or none
Private VLAN
Host-association
Shows the secondary (or community) VLAN with which this port is
associated
Private VLAN Mapping Shows the primary VLAN mapping for a promiscuous port
802.1Q-tunnel Status Shows if 802.1Q tunnel is enabled on this interface
802.1Q-tunnel Mode Shows the tunnel mode as Normal, 802.1Q Tunnel or 802.1Q
Tunnel Uplink
802.1Q-tunnel TPID Shows the Tag Protocol Identifier used for learning and switching
packets
Table 5-53 Interfaces Switchport Statistics
528