PLANET SGSD-1022 - Manual (Page 414)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
snmp-server
This command enables the SNMPv3 engine and services for all management clients (i.e., versions 1, 2c, 3). Use the no form to
disable the server.
Syntax
[no] snmp-server
Default Setting
Enabled
Command Mode
Global Configuration
Example
Console(config)#snmp-server
Console(config)#
show snmp
This command can be used to check the status of SNMP communications.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command provides information on the community access strings, counter information for SNMP input and output
protocol data units, and whether or not SNMP logging has been enabled with the snmp-server enable traps command.
Example
Console#show snmp
SNMP Agent: enabled
SNMP traps:
Authentication: enable
Link-up-down: enable
SNMP communities:
private, and the privilege is read-write
414