PLANET SGSD-1022 - Manual (Page 596)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Example
The following example enables VoIP traffic detection and specifies the Voice VLAN ID as 1234.
Console(config)#voice vlan 1234
Console(config)#
voice vlan aging
This command sets the Voice VLAN membership time out. Use the no form to restore the default.
Syntax
voice vlan aging minutes
no voice vlan
minutes - Specifies the port Voice VLAN membership time out.
(Range: 5-43200 minutes)
Default Setting
1440 minutes
Command Mode
Global Configuration
Command Usage
The Voice VLAN aging time is the time after which a port is removed from the Voice VLAN when VoIP traffic is no longer
received on that port.
Example
The following example configures the Voice VLAN aging time as 3000 minutes.
Console(config)#voice vlan aging 3000
Console(config)#
voice vlan mac-address
This command specifies MAC address ranges to add to the OUI Telephony list. Use the no form to remove an entry from the list.
Syntax
voice vlan mac-address mac-address mask address-mask [description description]
no voice vlan mac-address mac-address mask address-mask
• mac-address - Defines a MAC address OUI that identifies VoIP devices in the network.
• (For Example ,01-23-45-00-00-00)
• address-mask - Identifies a range of MAC addresses.
596