PLANET SGSD-1022 - Manual (Page 415)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
public, and the privilege is read-only
0 SNMP packets input
0 Bad SNMP version errors
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
0 Number of requested variables
0 Number of altered variables
0 Get-request PDUs
0 Get-next PDUs
0 Set-request PDUs
0 SNMP packets output
0 Too big errors
0 No such name errors
0 Bad values errors
0 General errors
0 Response PDUs
0 Trap PDUs
SNMP logging: disabled
Console#
snmp-server community
This command defines the SNMP v1 and v2c community access string. Use the no form to remove the specified community
string.
Syntax
snmp-server community string [ro|rw] no snmp-server community string
string - Community string that acts like a password and permits access to the SNMP protocol. (Maximum length: 32
characters, case sensitive; Maximum number of strings: 5)
ro - Specifies read-only access. Authorized management stations are only able to retrieve MIB objects.
rw - Specifies read/write access. Authorized management stations are able to both retrieve and modify MIB objects.
Default Setting
public - Read-only access. Authorized management stations are only able to retrieve MIB objects.
private - Read/write access. Authorized management stations are able to both retrieve and modify MIB objects.
415