Show lldp info remote-device, Show lldp info statistics – PLANET SGSD-1022 User Manual
Page 621
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
show lldp info remote-device
This command shows LLDP global and interface-specific configuration settings for remote devices attached to an
LLDP-enabled port.
Syntax
show lldp info remote-device [detail interface] detail - Shows detailed information.
interface
ethernet unit/port
-unit - Stack unit. (Range: 1)
-port - Port number. (Range: 1-28)
• port-channel channel-id (Range: 1-12)
Command Mode
Privileged Exec
Example
Console# show lldp info remote-device
LLDP Remote Devices Information
Interface | ChassisId PortId SysName
--------- + ----------------- ----------------- --------------------
Eth 1/1 | 00-01-02-03-04-05 00-01-02-03-04-06
Console# show lldp info remote-device detail ethernet 1/1
LLDP Remote Devices Information Detail
Local PortName: Eth 1/1
Chassis Type:
MAC Address
Chassis Id :
00-01-02-03-04-05
PortID Type:
MAC Address
PortID :
00-01-02-03-04-06
SysName :
SysDescr :
SGSD-1022
PortDescr:
Ethernet Port on unit 1, port 1
SystemCapSupported : Bridge
SystemCapEnabled : Bridge
Remote Management Address : 00-01-02-03-04-05 (MAC Address)
Console#
show lldp info statistics
This command shows statistics based on traffic received through all attached LLDP-enabled interfaces.
621