PLANET SGSD-1022 - Manual (Page 47)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
3.4 Web Management
The Managed Switch provides a browser interface that lets you configure and manage the switch remotely. After you set up your
IP address for the switch, you can access the Managed Switch's Web interface applications directly in your Web browser by
entering the IP address of the Managed Switch. You can then use your Web browser to list and manage the Managed Switch
configuration parameters from one central location, just as if you were directly connected to the Managed Switch's console port.
Web Management requires either Microsoft Internet Explorer 6.0 or later, Safari or Mozilla Firefox 1.5 or later.
Figure 3-3 Web management
3.5 SNMP-Based Network Management
You can use an external SNMP-based application to configure and manage the Managed Switch, such as SNMPc Network
Manager, HP Openview Network Node Management (NNM) or What’s Up Gold. This management method requires the SNMP
agent on the switch and the SNMP Network Management Station to use the same community string. This management
method, in fact, uses two community strings: the get community string and the set community string. If the SNMP Net-work
management Station only knows the set community string, it can read and write to the MIBs. However, if it only knows the get
community string, it can only read MIBs. The default gets and sets community strings for the Managed Switch are public.
Figure 3-4 SNMP management
47