Teac GigaStudio 4 - Manual (Page 114)

GigaStudio 4 Reference Manual 114
Each DSP Station channel strip has an assigned number pair at the top that identifies the channel strip’s input.
Each DSP channel represents a stereo pair of inputs However, DSP channels can be "unlinked" for independent
mixing control over the left and right signals. The DSP channel numerical labels are fixed, and cannot be
changed.
Inputs
By default, the 16 MIDI Mixer channels of each port patch to the first 32 DSP Station inputs. The right-most
side of each MIDI Mixer channel strip shows the DSP Station channel strip to which it is assigned.
Example: A MIDI Mixer instrument output that says MX 1:2 means it’s a stereo signal and goes to the DSP
Station channels labeled '1,2.' MX 13:14 would also indicate a stereo signal, and this would go to the DSP
Station channels labeled '13,14.' The assignments for the MIDI Mixer channel outputs are not fixed, and can be
changed to feed any DSP Station input. In fact, more than one MIDI Mixer channel can feed the same DSP
Station input.