Teac GigaStudio 4 - Manual (Page 188)

GigaStudio 4 Reference Manual 188
ReWiring GigaStudio 4 with Cakewalk Project5
This procedure is based on Project5 version 2.5 for Windows XP, and assumes that you have already set up
Project5 to accept MIDI input, and output audio.
1. If you have not used Project5 yet, run it at least once before proceeding so that Project5 can install its
ReWire engine in your system.
2. Right-click in the Track area, then select Insert Instrument > ReWire Devices > Giga4.
3. Click on the track’s Show Instrument button, or launch GigaStudio 4 manually.
4. With the track still selected in Project5, play your MIDI keyboard. You’ll hear GigaStudio’s audio
coming out of Project5’s mixer. If not, click on the Show Track Inspector button, and make sure that the
MIDI input is set correctly.