Teac GigaStudio 4 - Manual (Page 34)

GigaStudio 4 Reference Manual 34
Detaching a Sub-Channel Instrument
To detach one sub-channel instrument while leaving the other ones in place, click on the downward pointing
arrow toward the right of the sub-channel field, and select ‘Detach instrument’.
Note: When detaching single sub-channel instruments from a Stacked Instrument that contains a
Keyswitch, it may be necessary to redefine the Keyswitch within the channel’s Stack Properties (see
below).
Renaming a Stacked Instrument
The simplest way to rename a stacked instrument is to click the current stack name within the Main
channel’s slot field (the field’s background turns yellow, and the name is highlighted with a blue background),
type in a new name and press ‘Enter’ to confirm.
You can also rename a stacked instrument using the Stack Properties dialog, as described in the Stack
Properties section.