Teac GigaStudio 4 User Manual
Page 180
Advertising
GigaStudio 4 Reference Manual
180
4. Launch GigaStudio 4.
5. Repeat steps 2 and 3 if needed to send more outputs from GigaStudio 4 to Acid Pro.
6. Go Insert > MIDI Track.
7. A MIDI track appears in Acid. In the MIDI track’s output port field, choose the appropriate GigaStudio 4
instrument.
8. Play your MIDI keyboard, and you’ll hear GigaStudio’s audio coming out of Acid Pro’s mixer.
Gigastudio 4 is now ready to run in ReWire Slave mode, while Acid is the ReWire Master. You can record the
GigaStudio 4 ReWire input in Acid as you would with any other input in Acid. (For more application-specific
information on ReWiring, see the Acid Pro manual.)
To disconnect the ReWire connection from Acid Pro, quit GigaStudio first.
Advertising