Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer - Manual (Page 122)

Restarting the Machine
8W0J-028
When you make changes to the settings of the machine, you may have to restart the machine to apply the changes
depending on the setting.
When you change the settings using either the control panel or Remote UI, you can restart the machine using the
power switch.
Restarting the machine deletes any data waiting to be printed.
● The following data remains stored without being deleted even if the machine is restarted:
- Received data saved in the memory
- Data waiting to be sent
- Reports to be printed automatically after data is sent or received
1
Press the power switch.
➠ The display turns off, and the power turns OFF.
It may take a few minutes until the power turns OFF. Do not unplug the power cord until the power turns
OFF.
Make sure that the power indicator has gone out.
2
Wait at least 10 seconds after turning OFF the power before pressing the power
switch.
➠ The machine starts up.
Basic Operations
113