Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer - Manual (Page 502)

[Fax Settings]
8W0J-0AE
Specify the settings for sending faxes.
* Values in bold red text are the default settings for each item.
* [Fax Settings] may not be displayed depending on the model, the installed options, and other settings.
[Change Default Settings](P. 493)
[Off-Hook Alarm](P. 493)
[ECM TX](P. 494)
[Set Pause Time](P. 494)
[Auto Redial](P. 494)
[Check Dial Tone Before Sending](P. 495)
[Set Line](P. 495)
[TX Start Speed](P. 495) [Archive TX Document](P. 496)
[Confirm Entered Fax Number](P. 496)
[Allow Fax Driver TX](P. 496)
[Use Address Book When On-Hook](P. 496)
[Restrict Sequential Broadcast](P. 496)
[Register Log Dest to Addr Book](P. 497)
[TX Terminal ID](P. 497)
[Auto Adjust VoIP Comm. Speed](P. 497)
[Change Default Settings]
[Menu] [Function Settings] [Send] [Fax Settings]
Change the default settings for sending Faxes. Changing the Default Settings(P. 190)
When you press on the control panel while the fax sending screen is displayed, the settings revert to the values
specified here.
[Resolution]
[ 200 x 100 dpi (Normal) ]
[200 x 200 dpi (Fine)]
[200 x 200 dpi (Photo)]
[200 x 400 dpi (Superfine)]
[Density]
9 levels
[2-Sided Original] *1
[ Off ]
[Book Type]
[Calendar Type]
[Sharpness]
7 levels
[Initialize]
*1 May not be displayed or available depending on the model, the installed options, and other settings.
[Off-Hook Alarm]
[Menu] [Function Settings] [Send] [Fax Settings]
Adjust the volume of the alarm tone sounded when a telephone is connected and the receiver or handset is left
off the hook.
● Dragging the slider to the right increases the volume.
Settings Menu Items
493