752(p. 646) #753(p. 646) #755(p. 646) – Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer User Manual
Page 655
Wait for sending to be completed before sending again.
Are You Sending an Original with Many Pages?
Divide the original and send it.
Check the Received Faxes Saved in the Memory.
Print or forward them as needed, and delete any unnecessary faxes. Viewing and Printing Faxes Saved in
Restart the Machine, and Then Send or Save the Data Again.
Restarting the Machine(P. 113)
#752
The SMTP/POP3 server name is not configured correctly, or the machine is not connected correctly to the network.
Configure the SMTP or POP3 Server Name Correctly.
Configuring Detailed Information of the E-mail Server (Remote UI)(P. 239)
Check the Network Status and Settings.
If the machine is not connected to a network, reconfigure the network settings.
Checking the Network Status and Settings(P. 96)
#753
The machine was unable to connect to the network due to a disconnected Ethernet cable.
Check That the Ethernet Cable Is Properly Connected.
#755
The TCP/IP is not configured correctly, or the machine was unable to connect to the network due to the set wait time
before connection.
Check the Network Status and Settings.
If the machine is not connected to a network, reconfigure the network settings.
Checking the Network Status and Settings(P. 96)
Is There a Set Wait Time Before Connection?
Check whether a wait time is set.
Log in to Remote UI in System Manager Mode [Settings/Registration] [Network Settings] [Waiting
Time for Connection at Startup]
On the control panel, select [Menu] in the [Home] screen, and then select [Preferences] to view this
information. [Waiting Time for Connection at Startup](P. 439)
●
If a wait time is set, a connection cannot be established immediately after turning ON the power of the
machine. Sending starts after the wait time has elapsed.
Troubleshooting
646