Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer - Manual (Page 67)

Selecting Wired or Wireless LAN
8W0J-019
Set whether to connect the machine to the network using a wired or wireless LAN.
If you want to switch from wired LAN to wireless LAN, you can make the setting during the procedure for connecting
to wireless LAN. Connecting to a Wireless LAN(P. 61)
* You cannot connect to a wired LAN and wireless LAN at the same time.
Use the control panel to configure the settings. You cannot configure the settings using Remote UI from a computer.
Administrator privileges are required.
Touch Panel Model(P. 58)
5 Lines LCD Model(P. 58)
Touch Panel Model
1
On the control panel, press [Menu] in the [Home] screen. [Home] Screen(P. 120)
2
Press [Preferences] [Network] [Select Wired/Wireless LAN].
➠ The [Select LAN] screen is displayed.
If the login screen appears, enter the System Manager ID and PIN, and then press [Log In]. Logging In to
the Machine(P. 137)
3
Select [Wired LAN] or [Wireless LAN].
➠ The message [Settings applied.] appears.
Next, connect to the wired or wireless LAN.
Connecting to a Wired LAN(P. 60)
Connecting to a Wireless LAN(P. 61)
When Switching between Wired and Wireless LAN
● Any installed drivers must be uninstalled and then reinstalled.
For details about uninstalling and installing drivers, see the driver manual at the online manual site.
https://oip.manual.canon/
5 Lines LCD Model
1
Press On the control panel. Control Panel(P. 14)
2
Press [Preferences] [Network] [Select Wired/Wireless LAN] .
Setting Up
58