Preparing to send scanned data by e-mail, Preparing to send scanned data by e-mail(p. 235) – Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer User Manual
Page 244
Preparing to Send Scanned Data by E-mail
8W0J-04X
Configure the settings of the e-mail server to be used to send e-mail. Depending on the settings, use either of the
following methods to configure the settings from a computer. You cannot use the control panel to configure the
settings.
Configuring the Basic Settings for Sending E-mail (Windows)
Configure the basic settings of the e-mail server. You can also register destination e-mail addresses to One-
Touch in the Address Book. Use Send Function Setting Tool to configure the settings.
Configuring the Basic Settings for Sending E-mail (Send Function Setting Tool)(P. 236)
* One-Touch is a list of destinations that can be recalled with [
] in the Address Book or [One-Touch] in the
[Home] Screen.
Configuring Detailed Information of the E-mail Server
In addition to the basic information of the e-mail server, you can also configure POP authentication before
sending and encryption communication settings. Use Remote UI to configure the settings.
Configuring Detailed Information of the E-mail Server (Remote UI)(P. 239)
* Register destination e-mail addresses to the Address Book as needed.
Registering Destinations to the Address Book (Control Panel)(P. 171)
Registering Destinations to the Address Book (Remote UI)(P. 176)
Scanning
235