Could not connect – Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer User Manual

Page 642

Advertising
background image

If It Does Not Support WPS
Connect using a different connection type. Connecting to a Wireless LAN(P. 61)

Could not connect.

An error occurred, preventing the machine from establishing a direct connection.

Wait a Moment, and Try Connecting Again.

If you still cannot establish a connection, restart the machine.

Set the IP Address for Connection to Something Other Than "192.168.22.xx".

The machine must be restarted to apply the settings.

Log in to Remote UI in System Manager Mode [Settings/Registration] [Network Settings] [Direct
Connection Settings] [Edit] in [IP Address for Direct Connection], enter the IP address [OK] restart
the machine

On the control panel, select [Menu] in the [Home] screen, and then select [Preferences] to configure the

settings. [Direct Connection Settings](P. 437)

Is the Subnet Mask Configured Correctly?

Check the IPv4 subnet mask settings. Change the settings if they have not been configured correctly. For

details, contact the network administrator.

Viewing the IP address set to the machine(P. 97)

Setting IPv4 Addresses(P. 77)

Could not connect. Check the encryption key settings.

The network key (encryption key) of the wireless LAN router (access point) is not configured correctly, preventing

connection.

Reset the Network Key.

Check the network key of the wireless LAN router, and configure the settings correctly on the machine.

Connecting to a Wireless LAN(P. 61)

Could not connect. Max no. of devices that can connect to access point
reached

The maximum number of devices that can be connected to the wireless LAN router (access point) has been reached,

preventing connection.

Reduce the Number of Devices (Clients) Connected to the Wireless LAN Router.

For the maximum number of connections, see the manual of the wireless LAN router or contact the

manufacturer.

Could not detect any connections from wireless devices.

An error occurred, preventing the machine from detecting mobile devices.

Did You Connect Within the Fixed Time?

Connect the mobile device to the machine within five minutes of the SSID and network key being displayed.

Troubleshooting

633

Advertising