Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer - Manual (Page 303)

➠ The job details are displayed.
3
View the number of pages and the fax numbers of the destination and sender.
When there are multiple fax destinations, press [Number of Destinations] to display them in a list.
When the TX/RX Job Log displays [Error]
Sending or receiving was canceled, or an error occurred.
If a three-digit number starting with "#" (error code) is displayed, you can check the cause and solution
using the error code. An Error Code Is Displayed(P. 643)
Registering Destinations to the Address Book
● On the screen displaying the job details, press [Reg Adr Book] to register the destination to the Address
Book.
* This operation is not available when there are multiple destinations.
Checking Faxes that Failed to Be Forwarded
If a fax could not be forwarded but remains in the memory, you can print it or forward it to a different destination, and
view its content.
This section describes how to check the fax content using the control panel.
You can also use Remote UI from a computer to check the fax content. To preview the fax content, use the Remote UI.
Checking Usage and Logs with Remote UI(P. 403)
Required Preparations
● Configure the settings to save faxes that could not be forwarded in the memory of the machine. Auto
Forwarding and Backing Up Received Faxes(P. 276)
1
Press on the control panel. Control Panel(P. 14)
➠ The [Status Monitor] screen is displayed.
2
Press [Fax Forwarding Errors].
➠
A list of jobs of faxes that could not be forwarded is displayed.
3
Select a job you want to check.
➠ The job details are displayed.
4
Print or forward the fax to a different destination, and view the fax content.
● To print with the machine, press [Print/Fwd] [Print] [Yes].
● To send or save the fax to a destination different from the one set as the forwarding destination, press [Print/
Fwd] [Forward], select the destination from the Address Book.
Faxing
294