Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer User Manual

Page 349

Advertising
background image

Manually Configuring the Wi-Fi Settings

1

Check the SSID and network key of the machine.

2

In the Wi-Fi settings of the mobile device, select the SSID of the machine, and enter the network key.
For details about how to configure the Wi-Fi settings, see the manual of the mobile device.

4

When [Connected.] appears on the control panel, press [Close].

The direct connection screen reappears.
By default, only one mobile device can be directly connected to the machine at any one time. [Maximum
number of wireless devices connected using Direct Connection has been reached.] is displayed on the
screen.

5

When you have completed your operations on the mobile device, press
[<Disconnect>]

.

The direct connection is terminated.
If multiple mobile devices are connected, all devices are disconnected.

You may not be able to connect to the Internet with Direct Connection depending on the mobile device.

The power-saving effect of sleep mode decreases when using Direct Connection.

The IP address of the mobile device is set automatically. If you set the IP address manually, communication
using Direct Connection may not be performed correctly.

Checking a Mobile Device Connected to the Machine

When using Direct Connection, press [Connection Information] to display the information of the mobile
device connected to the machine with Direct Connection.

If the Direct Connection Is Automatically Disconnected

The direct connection is automatically terminated in the following cases:
- When the Direct Connection Termination is set
- When no data is sent or received between the mobile device and the machine for a while
- When the wireless LAN connection of the machine is terminated

Linking with Mobile Devices

340

Advertising