Lpd settings, Raw settings, Wsd settings – Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer User Manual
Page 457
[WINS Server Address]: 0.0.0.0
[LPD Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings]
Specify whether to use the LPD protocol. Configuring LPD, RAW, or WSD(P. 392)
If the LPD protocol is used, you can also set the time from the start of reception standby, after print data reception is
canceled, to the timeout.
[LPD Print Settings]
[Off]
[
On
]
[RX Timeout]
1 to
5
to 60 (min.)
[RAW Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings]
Specify whether to use the RAW protocol. Configuring LPD, RAW, or WSD(P. 392)
If the RAW protocol is used, you can also set the time from the start of reception standby, after print data reception is
canceled, to the timeout.
[RAW Print Settings]
[Off]
[
On
]
[RX Timeout]
1 to
5
to 60 (min.)
[WSD Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings]
Specify whether to use the WSD protocol. You can specify this setting for each of the functions that use the WSD
protocol. Configuring LPD, RAW, or WSD(P. 392)
[WSD Print Settings]
[Use WSD Print]
[Off]
[
On
]
[Use WSD Browsing]
[Off]
[
On
]
[Use Multicast Discovery]
[Off]
[
On
]
[WSD Scan Settings]
[Use WSD Scan]
Settings Menu Items
448