Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer - Manual (Page 468)

[Special Processing]
8W0J-09W
Use a range of processes to resolve problems that arise due to factors such as the paper type, the material used, or its
condition.
* Values in bold red text are the default settings for each item.
[Special Paper Processing](P. 459)
[High Humidity Mode](P. 460)
[Low Humidity Mode](P. 460)
[Prevent Postcard Fogging](P. 460)
[Talc Paper Mode](P. 460) [Prevent Image Distortion](P. 461)
[Select Line Width](P. 461)
[Prevent Stains on Printed Images](P. 461)
[Correct Blurry Image for Copy](P. 461)
[Correct Blurry Image](P. 462)
[Special Paper Processing]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Specify special processing for the paper in the following situations:
● If you are using special paper
- To print on the back of printed paper
- For paper with a rough surface
● If the envelope flap is stuck down
● If the paper curls during printing
[Manual Back Side Print (2-Sided Only)]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing] [Special Paper
Processing]
If you are using paper that has already been printed on, toner smudges and splatters may appear on the back
side. If so, specifying [On] for that paper source may improve the print results.
* When this is set to [On], if some time has passed since the front side of the paper was printed, or depending
on the operating environment humidity, changes in image quality or paper jams may occur.
[Multi-Purpose Tray]
[ Off ]
[On]
[Drawer 1]
[ Off ]
[On]
[Rough Surface Paper Mode]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing] [Special Paper
Processing]
If you are using paper with a rough surface, printed images may appear faint. If so, specifying [On] for that
paper source may improve the print results.
* Specifying [On] in this setting may lead to slower print speeds or changes in the image quality.
[Multi-Purpose Tray]
Settings Menu Items
459