Canon imageCLASS MF264dw II Multifunction Monochrome Laser Printer User Manual
Page 203
2
[Preferences] [Volume Settings].
➠
The [Volume Settings] screen is displayed.
3
Select the item whose volume you want to adjust.
[Ring Tone]
Adjust the volume of the sound notifying you of incoming faxes.
[TX Done Tone]
Adjust the volume of the sound notifying you that sending of a fax is complete.
[RX Done Tone]
Adjust the volume of the sound notifying you that receiving of a fax is complete.
[Scanning Done Tone]
Adjust the volume of the sound notifying you that scanning of a fax original is complete.
4
Drag the slider to the left or right to adjust the volume, and press [Apply].
➠
The volume is adjusted.
●
Dragging the slider to the right increases the volume.
●
Dragging the slider to the far left mutes the sound.
●
To emit a completion sound only when an error occurs, press [When Error] and set to [On].
Setting the Notification Sounds for Operations and Statuses
You can also set whether the machine emits sounds notifying you of operations and statuses, such as when operating
the control panel and errors are detected.
This section describes how to configure the settings using the control panel.
You can also configure the settings using Remote UI from a computer. Managing the Machine from a Computer
1
On the control panel, press [Menu] in the [Home] screen. [Home] Screen(P. 120)
2
[Preferences] [Volume Settings].
➠
The [Volume Settings] screen is displayed.
3
Set whether notification sounds are emitted. [Volume Settings] Screen(P. 196)
To emit notification sounds, select the item and press [On].
Basic Operations
194